Digimon Spirit Image Gallery


agumon001.gif
205 viewsPrint out the template of choice. If using the black and white template, try printing it on orange construction paper.

Colour (where appropriate) and cut out the template pieces.

Glue the large rectangular piece on first to cover the tube.

Glue on the head, legs and the arms.

Close the template window after printing to return to this screen.

Set page margins to zero if you have trouble fitting the template on one page (FILE, PAGE SETUP or FILE, PRINTER SETUP in most browsers).
agumon002.gif
154 viewsAgumon is made with a toilet paper tube, a printer, a piece of paper, some crayons, scissors and glue. I always prefer to use a heavy paper (like construction paper), but it isn't necessary.
angewomon001.gif
194 views
angewomon002.gif
235 viewsColour (where appropriate) and cut out the template pieces.

Glue the large rectangular piece on first to cover the tube.

You might want to take a good look at the tube (maybe put the legs on last?) and cut it down to make her look more proportional. Cutting off and throwing away 1/4 of the tube usually works quite well.

Glue on the head, legs and the arms. We made her so it looked like she was sitting down.

Glue the wings onto the back of the tp roll.
angewomon003.gif
199 viewsAngewomon is made with a toilet paper tube, a printer, a piece of paper, some crayons, scissors and glue. I always prefer to use a heavy paper (like construction paper), but it isn't necessary.
botamon.jpg
200 viewsMaterials: Corrugated cardboard, Scrap paper, Pencil, Scissors
Construction paper, Glue, Popsicle stick, markers, Wiggle eyes

Draw your pattern up on the scrap paper. You may wish to look at some pictures of your favorite characters while you draw the pattern.

Cut pattern and trace around it on construction paper and on the cardboard. Cut out.

Glue construction paper to the cardboard.

Create and glue the features.

Put glue on stick and push the Popsicle stick into the inside of the cardboard.
demiveemon001.gif
246 viewsPrint out the template of choice.

Colour (where appropriate) and cut out the template pieces.

Glue the large rectangular piece on first to cover the tube.

Glue on the head, legs and the arms. (demi-veemon's head is quite large so don't be surprised when you put it on the tp roll)

Glue the tail onto the back of the tp roll, using the tabs to make a 3D effect
demiveemon002.gif
217 viewsDemi-Veemon is made with a toilet paper tube, a printer, a piece of paper, some crayons, scissors and glue. I always prefer to use a heavy paper (like construction paper), but it isn't necessary.
gatomon001.gif
262 viewsPrint out the template of choice

Colour (where appropriate) and cut out the template pieces.

Glue the large rectangular piece on first to cover the tube.

You might want to take a good look at the tube (maybe put the legs on last?) and cut it down to make it look more proportional. Cutting off and throwing away 1/4 of the tube usually works quite well.

Glue on the head, arms and feet.

Glue the tail onto the back of the tp roll.

Close the template window after printing to return to this screen.
gatomon002.gif
278 viewsGatomon is made with a toilet paper tube, a printer, a piece of paper, some crayons, scissors and glue. I always prefer to use a heavy paper (like construction paper), but it isn't necessary.
   
10 files on 1 page(s)


© 2005 - 2013 Digimon Spirit. All Rights Reserved.